User's Manual

NetworkLAN Settings
............................................................................................................................................................................................................................................................
3EQ-10280-AAAA-TCZZA
Edition 01 February 2011
5-5
............................................................................................................................................................................................................................................................
Table 5-2 Field descriptions
Field Description
IP Address The IP address of the LAN interface in dotted
decimal notation. The default is 192.168.2.1. You
can change this address as necessary to any address
that is reserved for private use.
Subnet Mask The subnet mask of the IP addresses in your LAN;
for example, 255.255.255.0.
DHCP Server Select DHCP Server to enable DHCP server. The
CellPipe 7130 RG automatically assigns the IP
addresses, default gateway, and DNS servers to
computers that support the DHCP client; for
example, Windows 95 or Windows NT.
Select DHCP Relay to enable DHCP Relay.
Select Disable to disable DHCP server.
Note: Figure 5-2 shows the DHCP Server options.
Selecting DHCP Relay will open the DHCP Relay
server options.
DHCP Relay Server 1 Enter the IP address of the DHCP server.(DHCP
Relay)
DHCP Relay Server 2 Enter the IP address of the second DHCP server for
a different service, if applicable.(DHCP Relay)
Mapping Vendor ID Enter the Vendor ID for DHCP Option 60. When the
client sends a DHCP request that contains vendor ID
is equal to the Vendor ID, the request will be sent to
"DHCP Relay Server 2". (DHCP Relay)
DHCP Starting IP Address
DHCP Ending IP Address
The range of IP addresses that will be assigned to the
DHCP client.
DHCP Lease Time The time period during which the computers retain
the IP addresses assigned to them.
Static Lease Assign a static IP address to DHCP clients based on
their MAC address.
Block Lease The MAC address of the client to block from
acquiring an IP address.
Apply Changes Click to save your changes.