User's Manual

NetworkLAN Settings
............................................................................................................................................................................................................................................................
3EQ-10280-AAAA-TCZZA
Edition 01 February 2011
5-3
............................................................................................................................................................................................................................................................
Figure 5-2 Connecting storage device
Note:
• DMS works only for devices which are directly connected to the LAN interface of the
gateway.
• The content cannot be reached from the WAN interface.
• DMS only works when an storage devices is connected to the USB 2.0 interface.
• The DMS will support UMLAUT characters
• The following file systems will be supported: FAT16, FAT32, NTFS, EXT2, EXT3
via USB
WARNING
When a storage (USB-harddisk or USB memory stick) is connected to the gateway, the
content will be automatically be available on your home network and accessible by
everybody on that home network.
If the DMS function is enabled, the gateway discovers all digital media on the connected
storage device (Harddisk/USB-memory-stick) and make this accessible via PnP AV
protocol.
LAN Settings
The LAN Settings window enables you to configure the IP address, subnet mask, DHCP
settings, DHCP relay, and static IP lease.