User's Manual

3-1
3EQ-10280-AAAA-TCZZA
Edition 01 February 2011
............................................................................................................................................................................................................................................................
3 Accessing the CellPipe
7130 RG web
configuration tool
Overview
Purpose
This chapter explains how to access the CellPipe 7130 RG web configuration tool by
entering the IP address and the default passwords.
The management interface software is HTML-based and can be accessed using a web
browser.
Contents
This chapter covers the following topic:
To access the CellPipe 7130 RG web configuration tool
When to use
Use this procedure to access the web configuration interface of the CellPipe 7130 RG. The
configuration interface enables you to secure the CellPipe 7130 RG, limit access, set
traffic routes, modify passwords, and configure advanced settings.
Before you begin
Before you can configure the CellPipe 7130 RG, it must be installed, connected to a web-
enabled PC, and turned on.
To establish the initial connection with the CellPipe 7130 Gateway, your computers
should be configured to obtain automatically a network address via DHCP or via statically
configuration of the network address. In this case, the IP address should be in the range of
192.168.2.2 up to 192.168.2.99, for instance 192.168.2.10 The netmask should be
255.255.255.0
To access the CellPipe 7130 RG web configuration tool 3-1