User's Manual

............................................................................................................................................................................................................................................................
RGAM installation of the Residential Gateway Application
Module
Hardware installation
2-4
3EQ-10280-AAAA-TCZZA
Edition 01 February 2011
............................................................................................................................................................................................................................................................
RGAM installation of the Residential Gateway Application
Module
Purpose
The CellPipe 7130 Residential Gateway Application Module (RGAM) is an USB devices
which adds processing power to the residential gateway. This will allow future home
services to be deployed in your home, provided by your service provider.
Installation
As shown in the drawing, the RGAM has a USB 2.0 metal interface. This metal interface
should go into the RGAM slot first. The ventilation holes should facing up. Slide the
RGAM into the slot until it is blocked. Once inserted, the top of the RGAM will stick
outside the enclosure as illustrated below. Once the RGAM is inserted, the RGAM will
start up automatically. On the front panel of the residential gateway, the "USB 2" LED
will light up, indicating that the RGAM is up and running.