User's Manual

2-1
3EQ-10280-AAAA-TCZZA
Edition 01 February 2011
............................................................................................................................................................................................................................................................
2 Hardware installation
Overview
Purpose
This chapter provides the instructions to install the CellPipe 7130 RG hardware.
Contents
This chapter covers the following topics:
To mount the CellPipe 7130 RG
There are three ways to mount the CellPipe 7130 RG:
wall mounting
desktop mounting
stand-up mounting
Wall mounting
Pre-Requirements
Anchors
Screws
Drill & Drill bit
1. Locate a high position on the wall that is free of obstructions and insert two screws in
the wall 5 cm (2 in.) apart. Do not insert the screws all the way into the wall.
To mount the CellPipe 7130 RG 2-1
To install the CellPipe 7130 RG 2-2
RGAM installation of the Residential Gateway Application Module 2-4