User's Manual

Service SettingsTelephony
............................................................................................................................................................................................................................................................
3EQ-10280-AAAA-TCZZA
Edition 01 February 2011
10-7
............................................................................................................................................................................................................................................................
Active Enable Active to use the hot line and warm line
feature.
Warm Line Timer Select a time period from the drop-down menu.
Warm line will be activated after the timer has
expired.
Hot Line destination Enter a destination phone number for the hot
line. When hot line is activated, picking up the
phone will automatically place a call to the hot
line destination.
Warm Line destination Enter a destination phone number for the warm
line. When warm line is activated, picking up
the phone will automatically place a call to the
warm line destination after the warm line timer
has expired.
Service Code The service codes for activation, deactivation,
and interrogation.
Session Timer
Active Enable Active to turn on the session timer.
When session timer is enabled, the CellPipe
7130 RG will periodically send a refresh
message to refresh the session.
Default Session Expire Enter the default number of seconds SIP
session can remain idle before automatically
disconnecting. Default value is 1800.
Minimal Session Expire Enter the minimum number of seconds SIP
session can remain idle before automatically
disconnecting. Minimun value is 90.
Refresh Method Select Invite or Update from the drop-down
menu. This will be the type of message to send
for refreshing session.
Refresh Preference Select a refresher preference from the drop-
down menu. Select None to let CellPipe 7130
RG decide. Select UAC to let caller refresh the
session. Select UAS to let the receiver of the
call refresh the session.
Don’t Disturb
Service Code The service codes for activation, deactivation,
and interrogation of your do not disturb service.
Anonymous Call Rejection
Field Description