User's Manual
Table Of Contents
............................................................................................................................................................................................................................................................
QoS MACQoS PTM setup
9-12
3EQ-10280-AAAA-TCZZA
Edition 01 February 2011
............................................................................................................................................................................................................................................................
QoS MAC
The QoS MAC window enables you to configure a QoS policy for a specific device by
MAC address when the gateway is operating in bridge mode.
Select
QoS MAC in the QoS PTM Setup menu to access the QoS MAC window; see
Figure 9-7.
ToS/DSCP Remarking Select one of the following:
• Keep Original ToS/DSCP to retain the original
value.
• New ToS Value and enter a queue number (0 to 7)
to assign to the incoming traffic.
• New DSCP Value and enter a DSCP value (0 to 63).
CoS (p-bit) Remarking Select one of the following:
• Keep CoS Value to retain the original value.
• New CoS Value to set a new CoS value for
incoming traffic.
• Align CoS with ToS value to set CoS same as the
ToS value for incoming traffic.
Overview
Interface Name The Interface name of WAN connection to configure its
QoS policy.
QoS Upstream Classification The classification of the QoS rule:
• Original ToS Tag: the queue is assigned according
to the ToS value of incoming traffic.
• Specified Queue: incoming traffic is assigned to a
specific queue (0 to 7).
ToS/DSCP Settings The ToS/DSCP marking setting for incoming traffic.
CoS Settings CoS setting for the QoS rule.
Field Description