User's Manual

............................................................................................................................................................................................................................................................
QoS DefaultsQoS PTM setup
9-10
3EQ-10280-AAAA-TCZZA
Edition 01 February 2011
............................................................................................................................................................................................................................................................
QoS Defaults
The QoS Defaults window enables you to configure the default QoS policy for each WAN
connection.
Select QoS Defaults in the QoS PTM Setup menu to access the QoS Defaults window; see
Figure 9-6.
SIP Sessions/RTP Sessions
Queue Select one of the following:
• Original ToS Tag to assign the queue according to
the incoming ToS value.
• Specified Queue and enter a queue number (0 to
7) to assign to the incoming traffic.
ToS/DSCP Remarking Select one of the following:
• Keep Original ToS/DSCP to retain the original
value.
• New ToS Value and enter a queue number (0 to 7)
to assign to the incoming traffic.
• New DSCP Value and enter a DSCP value (0 to 63).
CoS (p-bit) Remarking Select one of the following:
• Keep CoS Value to retain the original value.
• New CoS Value to set a new CoS value for
incoming traffic.
• Align CoS with ToS value to set CoS same as the
ToS value for incoming traffic.
Apply Changes Click to save your changes.
Field Description