User's Manual
Table Of Contents
............................................................................................................................................................................................................................................................
QoS PolicyQoS PTM setup
9-6
3EQ-10280-AAAA-TCZZA
Edition 01 February 2011
............................................................................................................................................................................................................................................................
Table 9-3 Field descriptions
Field Description
Source
IP Address Select the radio button and enter the IP address of the
source host.
Netmask Select the subnet mask of the source host.
Interface Select the radio button and select a connection to
configure its QoS policy.
MAC Address Select the radio button and enter the MAC address.
Destination
IP Address Enter the IP address of the destination host.
Netmask Select the subnet mask of the destination host.
Protocol Click Select Protocol to choose a protocol.
Source Port Enter the range of source ports for this QoS policy.
Destination Port Enter the range of destination ports for this QoS policy.
QoS Classification
Queue Select one of the following:
• Original ToS Tag to assign the queue according to
the incoming ToS value.
• Specified Queue and enter a queue number (0 to
7) to assign to the incoming traffic.
ToS/DSCP Remarking Select one of the following:
• Keep Original ToS/DSCP to retain the original
value.
• New ToS Value and enter a queue number (0 to 7)
to assign to the incoming traffic.
• New DSCP Value and enter a DSCP value (0 to
63).
CoS (p-bit) Remarking Select one of the following:
• Keep CoS Value to retain the original value.
• New CoS Value to set a new CoS value for
incoming traffic.
• Align CoS with ToS value to set CoS same as the
ToS value for incoming traffic.
Add Click to add the policy and save your changes.
Overview
Target Upstream or Downstream. Target 1 is the highest
priority.