User's Manual

QoS PTM setupQoS Scheduler
............................................................................................................................................................................................................................................................
3EQ-10280-AAAA-TCZZA
Edition 01 February 2011
9-3
............................................................................................................................................................................................................................................................
Figure 9-2 QoS Upstream Scheduler window
Table 9-2 describes the fields of the QoS Upstream Scheduler window.
Table 9-2 Field descriptions
Field Description
QoS Enable Select Enable to activate the QoS scheduler. Select
Disable to turn off the QoS scheduler.
Scheduler Type Select the QoS scheduler type:
• Strict Priority: delivers high priority (7 is the
highest) traffic first and then lower priority
traffic when higher queues are empty.
• Min - Max Bandwidth: specifies the minimum
and maximum bandwidth for each queue.
Aggregate Rate Limiter Enter an upstream bandwidth value from 100 to
200000 Kb/s for your WAN connection. The default
value is 50000 Kb/s.
7. Urgent Specify the minimum and maximum bandwidth for
the urgent queue.
6. Real Time Specify the minimum and maximum bandwidth for
the real-time queue.
5. High Specify the minimum and maximum bandwidth for
the high queue.