User's Manual

............................................................................................................................................................................................................................................................
QoS SchedulerQoS PTM setup
9-2
3EQ-10280-AAAA-TCZZA
Edition 01 February 2011
............................................................................................................................................................................................................................................................
Figure 9-1 QoS Overview window
Table 9-1 describes the fields of the QoS Overview window.
Table 9-1 Field descriptions
QoS Scheduler
The QoS Scheduler window allows you to enable and disable the scheduler protocol and
determine the upstream bandwidth.
Select QoS Scheduler in the QoS PTM Setup menu to access the QoS Scheduler window;
see Figure 9-2.
Field Description
Precedence (read-only) Presents the priority of each QoS rule (Precedence 1
is the highest priority).
Source (read-only) IP address of the source host.
Destination (read-only) IP address of the destination host.
Protocol (read-only) The protocol type for the QoS rule.
Source Port (read-only) Port number of the source host.
Destination Port (read-only) Port number of the destination host.
QoS Classification (read-only) The classification of the QoS rule:
Original ToS Tag: the queue is assigned
according to the ToS value of incoming traffic.
Specified Queue: incoming traffic is assigned
to a specific queue (0 to 7).
ToS/DSCP Settings (read-only) The ToS/DSCP marking setting for incoming traffic.
CoS Settings (read-only) CoS setting for the QoS rule.