User Manual Part 2

LaCie Wireless Space • DESIGN BY NEIL POULTON Administering The LaCie Wireless Space
User Manual page 60
Simple Steps to a New Configuration
IMPORTANT INFO: While the Wireless Client will extend a Wi-Fi
signal to another room, LaCie recommends running the Setup Wiz-
ard or changing the settings in the Dashboard close to the access
point. It is far easier to manage the installation within proximity of
both devices.
To make the change from No Wireless to Wireless Client (Fig. 93):
1. Keep the Base Mode at NAS+Switch
2. Change the Mode to Wireless client (Wireless NAS)
3. Enter the SSID (the name of the Wi-Fi access point)
4. Choose the Security (WEP or WPA) of the Wi-Fi access point
5. Enter the security code (WEP or WPA password security key of
the wireless access point).
6. Choose the IP Configuration for the network. Fig. 93 shows the
IP Configuration as DHCP while Fig. 94 uses a Static IP address.
In the latter case, the user must know the range of IP addresses
that he may use. For business networks, an administrator choos-
es an available IP address.
7. Click APPLY
continued on the next page>>
Fig. 94
Fig. 93