User Manual Part 2

LaCie Wireless Space • DESIGN BY NEIL POULTON Administering The LaCie Wireless Space

User Manual page 52

There are three options for resetting the device (Fig. 78):

a. Reset factory conﬁguration. The ﬁrmware (if it has been up-

dated since the initial setup) and data remain intact. Once

this option is checked, select APPLY. The Wireless Space

will reboot to the default conﬁguration, NAS Router - Wired

Only.

b. Restore original software version (data preserved). The Wire-

less Space ﬁrmware and conﬁguration (NAS Router - Wired

Only) revert to their defaults. Once this option is checked,

select APPLY.

c. Restore device to factory state (data erased) (NAS Router -

Wired Only). The entire device reverts to its out-of-box set-

tings as the drive is formatted and the ﬁrmware update(s)

erased. ALL DATA WILL BE LOST. Once this option is

checked, select APPLY.

Advanced features - Light and HTTPS certiﬁcate

The default setting for the front light is on (Fig. 79). To turn it off,

deselect the light check box and choose APPLY. The light will turn

off during standard operations. However, the light will continue to

provide visual signals when it encounters an error, experiences fail-

ure, reboots, or resets. See 1.8. Light Behavior for more information

on the light.

To register HTTPS certiﬁcates, click UPLOAD to browse your com-

puter for the ﬁle.

Fig. 78

Fig. 79