User Manual Part 1

LaCie Wireless Space • DESIGN BY NEIL POULTON Basic Install: Setup Wizard

User Manual page 21

3. Basic Installation

Topics covered:

3.1. Connect the Power Supply

3.2. Conﬁguration 1: NAS Ethernet - Wired Only

3.3. Conﬁguration 2: NAS Wireless Client

3.4. LaCie Network Assistant

3.5. Accessing and Transferring Files

3.6. Administering Your LaCie Wireless Space

It is important to determine in advance which conﬁguration works

best for your network. Please review 2. What is the best conﬁguration

for my network? to ﬁnd the optimal mode for your Wireless Space.

With a conﬁguration in mind, you may run the Setup Wizard and

connect to your network.

3.1. Connect the Power Supply

1. Connect the power supply to a wall outlet and to the LaCie

Wireless Space (Fig. 10).

2. Push the rear power button for ﬁve seconds to turn it on (Fig.

11). The front light will indicate that the device is booting by

turning green (Wi-Fi disabled) or blue (Wi-Fi enabled). The light

will turn a solid color once the device is ready for use.

For more information on the power button, please see 1.5. Power

Button Functions

CAUTION: Only use the AC adapter supplied with your speciﬁc

LaCie device. Do not use a power supply from another LaCie device

or manufacturer. Using any other power cable or power supply may

cause damage to the device and void your warranty. Always remove

the AC adapter before transporting your LaCie network drive. Fail-

ure to remove the adapter may result in damage to your drive and

will void your warranty.

TECHNICAL NOTE: You may use your LaCie network drive when

in a foreign country thanks to its 100-240 Volt power supply. To be

able to use this feature, you may need to purchase an appropriate

adapter or cord. LaCie accepts no responsibility for any damage to

the drive resulting from the use of an inappropriate adapter. Using

an adapter other than one authorized by LaCie will void your war-

ranty.

Fig. 10

Fig. 11

IMPORTANT INFO: The light may not offer a sign that the device

is powering on while pressing the power button. It is recommended

to release the power button after ﬁve seconds, even if the light has

not turned on.