User's Manual

Chapter 3
Configuration
This chapter explains the advanced settings for WRTR-262GN. To change advanced settings, use
the WRTR-262GN’s web-based configuration utility.
How to Access the Web-Based Configuration Utility
To display the configuration of the AirStation, follow the procedure below.
1 Launch a web browser.
2 Enter the router’s LAN-side IP address in the address field, and
press the "Enter" key.
Note: ･ WRTR-262GN’s default LAN-side IP address depends on its mode setting.
In router mode: 192.168.11.1
In bridge mode: 192.168.11.100
･ If you change the IP address of this unit, use the new IP address.
3 When this screen appears, enter “ user ” (in lower case) for the user name, the password is the
same. Click “ OK ”.
Appendix
Regulatory Compliance Information