User's Manual

Device Information
This page displays the current information for the WRTB-283N. It will display the LAN, WAN (Internet), and Wireless information.
If your Internet connection is set up for a Dynamic IP address then a Release button and a Renew button wil be displayed. Use Release
to disconnect
from your ISP and use Renew to connect to your ISP.
If your Internet connection is set up for PPPoE, a Connect button and a Disconnect button will be displayed. Use Disconnect to drop the PPPoE
connection and use Connect to establish the PPPoE connection.
General: Displays the router’s time and firmware version.
WAN: Displays the MAC address and the public IP settings for the router.
LAN: Displays the MAC address and the private (local) IP settings for the
router.
Wireless LAN: Displays the wireless MAC address and your wireless settings such as
SSID and
Channel.
LAN Computers: Displays computers and devices that are connected to the router via Ethernet
and
that are receiving an IP address assigned by the router (DHCP).
IGMP Multicast Displays the Multicast Group IP Address.
Memberships: