User's Manual

Routing
The Routing option is an advanced method of customizing specific routes of data through your network.
Destination IP: Enter the IP address of packets that will take this route.
Netmask: Enter the netmask of the route, please note that the octets
must match your destination IP address.
Gateway: Enter your next hop gateway to be taken if this route is
used.
Metric: The route metric is a value from 1 to 16 that indicates
the
cost of using this route. A value 1 is the lowest cost and
15
is the highest cost.
Interface: Select the interface that the IP packet must use to
transit
out of the router when this route is used.