User's Manual

QW_02_0035.001

4. Network

The System menu consists of the following categories: WAN. Introduction and input

procedures for each category are described in the following paragraphs.

4.1 Network - WAN

The purpose of this category is to view current WAN settings.

This category is further divided into three sectors: Ethernet Wan and 3G/4G LTE.

These individual options are lodged and labeled above the main content panel.

Figure 11.A - WAN

4.1.1 Ethernet WAN

This page is to setup the connection type in terms of Static IP and DHCP client.

The three different options can be selected in the drop-down menu in

“WAN Type”. Please fill in the respective fields exhibited under each selection.

Please make sure the Ethernet cable is connected to a WAN port.

Figure 11.A - WAN: Static IP

Figure 11.B - WAN: DHCP Client