User's Manual

4 Installation
completely inserted and tightened.
4. Insert the rubber bushing on the cable into the gland base.
5. Gently twist the body into the ODU.
Step 4: Mounting the Device: Installing Pole Mount
1. Mount the ODU unit on a pole (Diameter between 1-4 inch) with the Pole
Mount Kit.
2. Thread the M10*100mm bolts through a spring washer, flat washer and the
bracket holes.
3. With the connector facing downward, attach the ODU to a size of 1 inch -4
inch pole.
4. Attach the bracket to the other side of the pole.
5. Thread the M10*100 mm bolts through both holes on either side. Tighten the
nuts.