User's Manual

Quick Installation Guide
1 Easy Setup
Proprietary and Confidential
Copyright © Gemtek Technology Co., Ltd.
1
1 Easy Setup
1.1 Hardware
Please follow the steps below to configure your device through the web interface:
Qualcomm module-based evaluation kit requires a Windows® PC, running Windows XP or Window7
with an USB 2.0 port. It can also be used with a computer running Linux.
1.2 Login to Web GUI
Please mount the module on a daughter board, and follow the steps below to configure your device through the
web interface:
Step1: Connect PC use RJ45 to PoE which is label IN.
Step2: Open the Web browser (Ex: Internet Explorer, Firefox or Chrome).
Step3: Enter the default IP address of CPE into web browser, which is : http://192.168.15.1
Step4: Enter USERNAME/PASSWORD to access the web management interface (web GUI).
Below is default Username and password for super user and end user.
Login As
Username
Password
Super User
administrator
Administrator
End User
admin
Admin
Step5: Press Login after to enter username/password.
Web management interface