User's Manual

LTE Indoor CPE | User Manual P. 32
WiFi | Settings
WiFi > Settings
Wireless Settings
 Interface Status: Click “Disable” button to disable WiFi, or click “Enable” to
activate WiFi function.
 Network Name (SSID): SSID (service set identifier) is a function performed by
an device transmits its name so that wireless stations searching for a network
connection can 'discover' it; the default value is “Airtel_EF819B”.
 Radio Channel: Select wireless channel from Channel 1 to 11. “Auto” will allow
CPE to choose the best channel automatically.
 Working Mode: Select the wireless protocol as you desired: “802.11b/g/n”,
“802.11b/g”, “802.11g/n”, “802.11b”, “802.11g”, or “802.11n”.
 Bandwidth(Only 11n): The setting is only available when wireless protocol