User's Manual

LTE Indoor CPE | User Manual P. 23
Network | Network Mode
Network > Network Mode
Operation Mode: Only NAT Mode is available at this moment.
Connection Mode: There are two connection mode provided from the CPE, “DHCP” or
“Static”.
 If “DHCP” mode is selected, CPE would automatically acquire configuration
information from a DHCP server and uses it to configure its host; enter the host
name in “Host Name” field. If successfully get the IP information from DHCP server,
they will be shown on each field with grey font.
 Static IP addresses are manually assigned to a device by an administrator; if
“Static” mode is selected, manually enter required information in below fields.
Cancel button
Reset fields to the last saved values.
Apply button
Commit the changes made and save to the CPE device, some
services will be reloaded.