User's Manual

LTE Outdoor Gateway Quick Installation Guide

Additional information:

Check below items before installing the outdoor CPE:

• One RJ-14 connector for connecting to the telephone line.

• One RJ-45 connector for connecting to the PoE adaptor.

• LED indicator inside and SIM card slot for inserting SIM card.

• A grounding screw on the rear panel.



  

Mounting the ODU

Mount the ODU unit on a 1"-4" pole using the supplied kit (Figure 1), or the optional Tilt accessory.

Using the Clamp

1 Thread the M10*100mm bolt through a spring washer, flat washer and the bracket holes.

2 With the connector facing downward, attach the ODU to a 1" -4" pole.

3 Attach the bracket to the other side of the pole.

4 Thread the M10*100 mm bolts through both holes on either side. Tighten the nuts.

Figure 1: Mounting the ODU on the Pole