User's Manual

6 Network

The System menu consists of the following categories: WAN, Wireless, LAN, DHCP,

Static Routes and Diagnostics. Introduction and input procedures for each category

are described in the following paragraphs.

6.1 Network - WAN

The purpose of this category is to view current WAN settings.

This category is further divided into three sectors: Ethernet Wan, 3G/4G LTE and

Wireless Extender. These individual options are lodged and labeled above the main

content panel.

Figure 25 - WAN

6.1.1 Ethernet WAN

This page is to setup the connection type in terms of Static IP, DHCP client or

PPPoE. The three different options can be selected in the drop-down menu in

“wantype”. Please fill in the respective fields exhibited under each selection.

Please make sure the Ethernet cable is connected to a WAN port.

Figure 26.A - WAN: Static IP