User's Manual

9
3.3 GIoT - Configuration
Click “PERFORM RESTART” button to restart LoRa server.
The latitude and longitude coordinates can be manually embedded in this page. Click
“SAVE LOCATION” button after inserting the coordinates or click “SELECT ON MAP”
button to be redirected to the map in GPS Settings.
Figure 13 - GIoT Management
3.4 GIoT - GPS MAP
To setup the GPS location, simply input your address location in the “Location” text
field above the map or pinpoint your location on the map by dragging the red
marker to the correct spot.
Once the location is confirmed, the system will verify and apply the new
Latitude/Longitude coordinates into its GPS setting.
Figure 14 - GPS Setting