User's Manual

Wireless LAN
Page 10 WL-211 PC Card User manual
18.
Repeat the step 15 and 16 to add IPX/SPX protocol.
19.
Repeat the step 15 and 16 to add TCP/IP protocol.
20.
Click on the TCP/IP option for setting the IP address for your computer. You can select either Static
or DHCP setting. If you use the static IP setup then enter the IP value, Subnet masking , DNS,
Domain/ Workgroup name, and Gateway Address values. After setting these parameter
appropriately, click OK to return to Network Component Type and you can select the File and
Printer Sharing options as well as the Access to your computer bu other users connected to that
network by setting the computer sharing options. Click on OK.
21.
Screen message do want to restart your Computer will pop up. Select Yes. It will shut down your
computer and will restart.