User's Manual

Installation LED Indication
BreezeMAX USB 250 4 User Manual
1.3 LED Indication
2. Installation
The following section will guide you through the hardware and software
installation.
The software installs drivers on your laptop, which allow you to use the
BreezeMAX USB250 just like a regular modem.
2.1 Prerequisites
Before installation, make sure you have a computer with the following:
 A minimum of 64MB available hard disk space
 An available USB 2.0 slot
 Windows XP, Windows 7 or Windows Vista operating system
2.2 Installation Procedure
1 Remove the plastic cap and slide the BreezeMAX USB250 into the USB port.
The LED indicator turns on if the device is properly inserted.
Color Status Description
Red On
 Power on
 No Network Entry
 Firmware download complete
 Driver initialized
Yellow/green Blinking WiMAX connected
IMPORTANT
Windows Vista and Windows 7 users must install under Administrator mode for installation to be
complete.
To install BreezeMAX USB: