User's Manual

6
local electrical codes: correct installation procedures for grounding of the outdoor unit,
mast, lead-in wire and discharge unit, location of discharge unit, size of grounding
conductors and connection requirements for grounding electrodes.
10. Keep all product information for future reference.
1.4 Electrical Safety
1. To minimize shock hazard, the equipment chassis and enclosure must be connected to
an electrical ground. All power outlets and plugs must meet International Electrotechnical
Commission (IEC) safety standards.
2. Do not operate the system equipment in the presence of flammable gases or fumes.
Operation of any electrical equipment in such an environment constitutes a definite safety
hazard.
3. Only qualified maintenance personnel may remove equipment covers to replaceinternal
subassemblies, components, or perform internal adjustments.
1.5 WEEE Product Return Process
In EU countries, dispose of equipment in accordance with the WEEE (Waste from Electrical and
Electronic Equipment) directive, 2002/96/EC, Gemtek is marked with the logo shown above. The WEEE
directive seeks to increase recycling and re-use of electrical and electronic equipment. This symbol
indicates that this product should not be disposed of as part of the local municipal waste program.
Contact your local sales representative for additional information. In non-EU countries, dispose of
equipment in accordance with national and regional regulations. In non-EU countries, dispose of
equipment in accordance with national and regional regulations.