PRO:3000 CPE Quick Installation Guide A Tip the cable sheath. b. Insert the screw nut inch the housing, foes {EH EEF 4 Stricken the gasket on the fronted of the housing. h. Secure the screw rut {C} in place. 2) Correct the Ethernet cable to the R45 connector of the QDU. Make sure think the connector is completely inserted and tightened Baltic tha mastic tape {Sootofl™ Electrical insulation Pity) and wap it avoid the connector butting Up against the ‘connector.
PRO 3000 CPE Quick Installation Guide 4. Connect one end of the straight Theme Callie (SPEC) to the Pol-PoE adapter. 5. Connect the either end to the LAN port of the PRO 3000 CPE. For more information refer ta the NG_VG Quick retaliation Guide. Basic Configuration Using the Web Configuration Server 3. Use the Wells Configuration Server to configure the basic parameters. 2 Convict a Notebook to the LAN port of the NG, V3, using the supplied Ethernet cable.
PRO 3000 CPE Quick Installation Guide Table 2: NG_VG LESS Name Description Functionality N ® Cit Red interface no established (Emmett cannelloni not detected) wa sisal Port siege ® Inking, Trachea is passing rough indication ® On: Wired interface established (Theme connection detected Radio Frequency interference Statement This equipment has been tested and fol ind to comply vita RS-107 and RES. 192 of the Industry Canada Rufus for 3x GH: bandwidth) and the knits for a gas 5 ital device.
