User's Manual
Table Of Contents
- Copyright
- Notice
- Contents
- About this Guide
- Purpose
- Prerequisite Skills and Knowledge
- Conventions Used in this Document
- Chapter 1 – Introduction
- Product Overview
- Product Package
- Safety information
- Tips for optimal device performance
- Device care
- Connector Details
- Visual Indications
- Chapter 2 – Reference Manual
- Chapter 3 – Web Interface
- Chapter 4 – Menu Details
- Setup
- Internet
- Local Address
- Advance
- Control Panel
- Status
- Reboot / Reconnect
User Manual
11
Connector Details
Connector View
1 RESET Button (Reboot/ Reset)
Press and hold the Reset button for less than 5
seconds to reboot the device. Or press and hold
the Reset button for more than 5 seconds to set
settings of device to factory default.
2 LAN Ports (RJ-45)
This port is for connecting the CPE to your PC or
other network equipments (such as hubs or
switches) with a RJ-45 Ethernet cable.
3 Telephone Ports (RJ-11)
Connect your telephone to the CPE using RJ-11
telephone cable.
4 DC-12V Port (Power Adapter Socket)
Connect the power adapter provided with
the CPE.