User Manual

Page 14 of 21
Forwarding Tab Click on the ADD button to create additional Port Fowarding rules
Field or Button Description
Select Select a box when you want to delete the specific
row.
Protocol Select TCP (Transmission Control Protocol) or UDP
(User Datagram Protocol).
WAN Port Start Enter the beginning port range for external network
access.
WAN Port End Enter the ending port range for external network
access.
LAN IP Address Enter the IP address to host the service.
LAN Port Start Enter the beginning port range for internal network
access.
LAN Port End Enter the ending port range for internal network
access.
Enabled Check to enable specific port forwarding.
Be sure to click the Apply button once you have made changes.
Local Address Menu
The Local Address menu allows you to configure your Local Area Network (LAN) connections.
The Local Address menu provides the following tabs: