User's Manual

ManualsBrandsGemtek Technology ManualsElectronicsRFID IOT Access Point

Installation Guide of the RFID IOT Access Point V0.2

Gemtek Technology Co., Ltd. In Commercial Confidential

WAPS-232N Installation Guide

RFID IOT Access Point

(Date: 12/10/2015)

Gemtek Technology Co., Ltd. Confidential information

This document contains confidential and/or proprietary information of Gemtek Technology Co.,

Ltd. and shall not be, directly or indirectly, reproduced or copied in any manner without the

written consent of Gemtek Technology Co., Ltd.

Summary of content (8 pages)

PAGE 1
Installation Guide of the RFID IOT Access Point V0.2 WAPS-232N Installation Guide RFID IOT Access Point (Date: 12/10/2015) Gemtek Technology Co., Ltd. Confidential information This document contains confidential and/or proprietary information of Gemtek Technology Co., Ltd. and shall not be, directly or indirectly, reproduced or copied in any manner without the written consent of Gemtek Technology Co., Ltd. Gemtek Technology Co., Ltd.
PAGE 2
Installation Guide of the RFID IOT Access Point V0.2 Revision History: Date/Version 06/26/2015 v0.0 08/31/2015 v0.1 12/10/2015 v0.2 Editor Cory Lam Cory Lam Cory Lam Remark Initial draft Add antenna specification Add FCC Statement Abbreviation: Gemtek Technology Co., Ltd.
PAGE 3
Installation Guide of the RFID IOT Access Point V0.2 Outline: 1 2 3 4 5 Application ........................................................................................................ 4 Product Overview .............................................................................................. 4 2.1 Enclosure Features ....................................................................................... 5 2.2 Power-Over-Ethernet (PoE) ...........................................................
PAGE 4
Installation Guide of the RFID IOT Access Point V0.2 1 Application This document is to describe the installation procedure and application of the RFID IOT Access Point. Project Code : WAPS-232N_AS 2 Product Overview The RFID IOT Access Point is one of many access points in our wireless IOT solution. Each RFID IOT Access Point can support tens of thousands of our IOT nodes. Our node is designed to interface to electric meter or an industrial PC that acts as a concentrator for collecting meter readings.
PAGE 5
Installation Guide of the RFID IOT Access Point V0.2 2.1 Enclosure Features The RFID IOT Access Point is designed to be mounted on a mounting pole. It comes with mount kit as shown here: 2.2 Power-Over-Ethernet (PoE) A CAT5 PoE interface is used to split the Data and Power carried by a CAT5 cable to the internal equipment. To supply the required current to the equipment, the PoE adapter that comes in the package should be used. Gemtek Technology Co., Ltd.
PAGE 6
Installation Guide of the RFID IOT Access Point V0.2 3 Installation 3.1 Professional Installation The RFID IOT Access Point, and any associated accessories require professional installation; a) installation of the equipment must be controlled, b) installation must be performed by professionals, c) installation of the equipment requires special training. 3.2 Mounting As described earlier, the RFID IOT Access Point comes with a mount kit for mounting on a pole.
PAGE 7
Installation Guide of the RFID IOT Access Point V0.2 4 Antenna Parameters This device has been tested with the antenna listed below, and has a peak gain of 0 dBi. The required antenna impedance is 50 ohms. Table 1 Typical Antenna Manufacturer TSKY Co., Ltd. TSKY Co., Ltd. Part Number A8-A003-00108 A8-A003-00109 Gain -0.4 1.38 Type Dipole Dipole Additional equivalent antennas from other manufactures may be substituted and then marketed with this equipment.
PAGE 8
Installation Guide of the RFID IOT Access Point V0.2 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. IMPORTANT NOTE: Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.