User's Manual
Table Of Contents
- About this document
- Contents
- 1 Product overview
- 2 Hardware installation
- 3 TCP/IP configuration
- 4 Accessing the CellPipe 7130 RG web configuration tool
- 5 Status
- 6 Network
- 7 WiFi Setup
- 8 Firewall Setup
- 9 Advanced Setup
- 10 QoS PTM Setup
- 11 Utilities
- 12 Telephony
- 13 USB Service
- 14 FCC and IC Statement
- A Troubleshooting
- B Product conformance
- Glossary
............................................................................................................................................................................................................................................................
QoS PolicyQoS PTM Setup
10-4
3EQ-10422-AAAA-TCZZA
Edition 01 February 2011
............................................................................................................................................................................................................................................................
QoS Policy
The QoS Policy window enables you to group upstream traffic into data flows according
to the source address, destination address, source port, and destination port.
Select QoS Policy in the QoS PTM Setup menu to access the QoS Policy window; see
Figure 10-3.
4. Low Specify the minimum and maximum bandwidth for
the Low queue.
3. Premium Specify the minimum and maximum bandwidth for
the Premium queue.
2. Critical Specify the minimum and maximum bandwidth for
the Critical queue.
1. Medium Specify the minimum and maximum bandwidth for
the Medium queue.
Apply Changes Click to save your changes.
Field Description