User's Manual

............................................................................................................................................................................................................................................................
QoS SchedulerQoS PTM Setup
10-2
3EQ-10422-AAAA-TCZZA
Edition 01 February 2011
............................................................................................................................................................................................................................................................
Figure 10-1 QoS Overview window
Table 10-1 describes the fields of the QoS overview window.
Table 10-1 Field descriptions
QoS Scheduler
The QoS Scheduler window allows you to enable and disable the scheduler protocol and
determine the upstream bandwidth.
Select QoS Scheduler in the QoS PTM Setup menu to access the QoS scheduler window;
see Figure 10-2.
Field Description
Precedence The Precedence presents the priority of each QoS
rule. (Precedence 1 is the highest priority.)
Source IP address of source host.
Destination IP address of destination host.
Protocol The protocol type of this QoS rule.
Source Port Port number of source host.
Destination Port Port number of destination host.
QoS Classification The classification of this QoS rule:
• Original ToS Tag - assign the queue according
to the incoming traffic ToS value.
• Specified Queue - incoming traffic will
assign a specific queue (0 to 7).
ToS/DSCP Setting TOS/DSCP marking setting for incoming traffic.
CoS Setting CoS (class of service) setting of this QoS rule.