User's Manual
Table Of Contents
- About this document
- Contents
- 1 Product overview
- 2 Hardware installation
- 3 TCP/IP configuration
- 4 Accessing the CellPipe 7130 RG web configuration tool
- 5 Status
- 6 Network
- 7 WiFi Setup
- 8 Firewall Setup
- 9 Advanced Setup
- 10 QoS PTM Setup
- 11 Utilities
- 12 Telephony
- 13 USB Service
- 14 FCC and IC Statement
- A Troubleshooting
- B Product conformance
- Glossary
802.1x ConfigAdvanced Setup
............................................................................................................................................................................................................................................................
3EQ-10422-AAAA-TCZZA
Edition 01 February 2011
9-7
............................................................................................................................................................................................................................................................
Table 9-5 Field descriptions
802.1x Config
The 802.1x Config window enables you to setup the 802.1x configuration. 802.1x is an
authentication mechanism for clients connecting to an IEEE 802 network such as
Ethernet (access) networks and 802.11 (public) wireless LANs.
Click on 802.1x Config in the Advanced Setup menu to access the 802.1x Config
window; see Figure 9-6.
Figure 9-6 802.1x Config window
Table 9-6 describes the fields of the 802.1x Config window.
Table 9-6 Field descriptions
Field Description
IGMP Enable Select Enable to allow IGMP support.
Select Disable to disable IGMP support.
Port Enable Enable/Disable IGMP support for each individual
LAN port.
IGMP Aging Time Enter the IGMP aging time in seconds.
Apply Changes Click to save your changes.
Field Description
EAP identify Enter the EAP identity.
Authentication Mode Select Unidirectional or Mutual support for each.