User's Manual
Table Of Contents
- About this document
- Contents
- 1 Product overview
- 2 Hardware installation
- 3 TCP/IP configuration
- 4 Accessing the CellPipe 7130 RG web configuration tool
- 5 Status
- 6 Network
- 7 WiFi Setup
- 8 Firewall Setup
- 9 Advanced Setup
- 10 QoS PTM Setup
- 11 Utilities
- 12 Telephony
- 13 USB Service
- 14 FCC and IC Statement
- A Troubleshooting
- B Product conformance
- Glossary
DNS SettingsAdvanced Setup
............................................................................................................................................................................................................................................................
3EQ-10422-AAAA-TCZZA
Edition 01 February 2011
9-3
............................................................................................................................................................................................................................................................
DNS Settings
The DNS Settings window enables you to configure the domain name and IP address of
the domain name.
Note: You can set up to 64 entries.
Select DNS Settings in the Advanced Setup menu to access the DNS Settings window;
see Figure 9-2.
Figure 9-2 DNS Settings window
Table 9-2 describes the fields of the Dynamic DNS window.
Table 9-2 Field descriptions
Dynamic Route (WAN) Select Enable to use dynamic routing instead of static. Dynamic
routing enables the router to adapt to changes in the network and
exchange rating table with other router(s). Select Disable to turn
off dynamic routing.
Apply Changes Click to save your changes.
Field Description
Field Description
Domain Name Enter the domain name to which you want to
connect.
IP Address Enter the IP address of the Static DNS.
Add Click to add the DNS settings and save your
changes.