User's Manual
Table Of Contents
- About this document
- Contents
- 1 Product overview
- 2 Hardware installation
- 3 TCP/IP configuration
- 4 Accessing the CellPipe 7130 RG web configuration tool
- 5 Status
- 6 Network
- 7 WiFi Setup
- 8 Firewall Setup
- 9 Advanced Setup
- 10 QoS PTM Setup
- 11 Utilities
- 12 Telephony
- 13 USB Service
- 14 FCC and IC Statement
- A Troubleshooting
- B Product conformance
- Glossary
URL BlockingFirewall Setup
............................................................................................................................................................................................................................................................
3EQ-10422-AAAA-TCZZA
Edition 01 February 2011
8-9
............................................................................................................................................................................................................................................................
Figure 8-6 NAT Passthrough window
Table 8-6 describes the fields of the NAT Passthrough window.
Table 8-6 Field descriptions
URL Blocking
The URL Blocking window enables you to block requests form your local computer to
access specific websites.
Select URL Blocking in the Firewall Setup menu to access the URL Blocking window;
see Figure 8-7.
Field Description
IPSec Passthrough Select Enable to allow IPSec passthrough. Select
Disable to disallow the IPSec passthrough.
L2TP Passthrough Select Enable to allow L2TP passthrough. Select
Disable to disallow L2TP passthrough.
PPTP Passthrough Select Enable to allow PPTP passthrough. Select
Disable to disallow PPTP passthrough.
Apply Changes Click to save your changes.