User's Manual
Table Of Contents
- About this document
- Contents
- 1 Product overview
- 2 Hardware installation
- 3 TCP/IP configuration
- 4 Accessing the CellPipe 7130 RG web configuration tool
- 5 Status
- 6 Network
- 7 WiFi Setup
- 8 Firewall Setup
- 9 Advanced Setup
- 10 QoS PTM Setup
- 11 Utilities
- 12 Telephony
- 13 USB Service
- 14 FCC and IC Statement
- A Troubleshooting
- B Product conformance
- Glossary
Layer 3 FilterFirewall Setup
............................................................................................................................................................................................................................................................
3EQ-10422-AAAA-TCZZA
Edition 01 February 2011
8-7
............................................................................................................................................................................................................................................................
Layer 3 Filter
Select Layer 3 Filter in the Firewall Setup menu to access the Layer 3 Filter window; see
Figure 8-5.
Figure 8-5 Layer 3 Filter window
Table 8-5 describes the fields of the Filter window.
Table 8-5 Field descriptions
Source Mac Address 1 to 10 Select and then enter the source MAC address of the
device.
Destination Mac Address 1 to 10 Select and then enter the destination MAC address
of the device.
Apply Changes Click to save your changes.
Field Description
Field Description
Filter Name Enter a name for this filtering rule.
IP Type Select Dest (destination) or Source depending on
the how the rule is going to be used.