User's Manual
Table Of Contents
- About this document
- Contents
- 1 Product overview
- 2 Hardware installation
- 3 TCP/IP configuration
- 4 Accessing the CellPipe 7130 RG web configuration tool
- 5 Status
- 6 Network
- 7 WiFi Setup
- 8 Firewall Setup
- 9 Advanced Setup
- 10 QoS PTM Setup
- 11 Utilities
- 12 Telephony
- 13 USB Service
- 14 FCC and IC Statement
- A Troubleshooting
- B Product conformance
- Glossary
Layer 2 FilterFirewall Setup
............................................................................................................................................................................................................................................................
3EQ-10422-AAAA-TCZZA
Edition 01 February 2011
8-5
............................................................................................................................................................................................................................................................
Select UPnP in the Firewall Setup menu to access the UPnP window; see Figure 8-3.
Figure 8-3 UPnP window
Table 8-3 describes the fields of the UPnP window.
Table 8-3 Field descriptions
Layer 2 Filter
Select Layer 2 Filter in the Firewall Setup menu to access the Layer 2 Filter window; see
Figure 8-4.
Field Description
UPnP Select Enable to enable the UPnP function. Select
Disable to disable the UPnP function.
UPnP Log Select Enable to enable the logging activities.
Select Disable to disable the logging activities.
ReadOnly Mode Select Enable to turn on the read-only mode. Select
Disable to turn off the read-only mode.
Note: In read-only mode, users are unable to
change port forwarding settings or any other UPnP
enabled application settings.
Apply Changes Click to save your changes.