User's Manual
Table Of Contents
- About this document
- Contents
- 1 Product overview
- 2 Hardware installation
- 3 TCP/IP configuration
- 4 Accessing the CellPipe 7130 RG web configuration tool
- 5 Status
- 6 Network
- 7 WiFi Setup
- 8 Firewall Setup
- 9 Advanced Setup
- 10 QoS PTM Setup
- 11 Utilities
- 12 Telephony
- 13 USB Service
- 14 FCC and IC Statement
- A Troubleshooting
- B Product conformance
- Glossary
8-1
3EQ-10422-AAAA-TCZZA
Edition 01 February 2011
............................................................................................................................................................................................................................................................
8Firewall Setup
Overview
Purpose
This chapter explains how to configure the firewall for the CellPipe 7130 RG.
Click the Firewall drop-down menu to open the Firewall Setup menu.
Contents
This chapter covers the following topics:
Port Forwarding
The Port Forwarding window enables you to control the incoming requests from the
Internet to pass through the port to your local computer, and acts as a gateway to pass your
service request using a different port or port range other than the standard port from the
Internet client to your local servers.
Note: It is recommended that port forwarding be configured with the assistance of
your ISP.
Port Forwarding 8-1
Demilitarized Zone (DMZ) 8-3
UPnP 8-4
Layer 2 Filter 8-5
Layer 3 Filter 8-7
NAT Passthrough 8-8
URL Blocking 8-9
Content Screening 8-10
Parental Control 8-12