User's Manual
Table Of Contents
- About this document
- Contents
- 1 Product overview
- 2 Hardware installation
- 3 TCP/IP configuration
- 4 Accessing the CellPipe 7130 RG web configuration tool
- 5 Status
- 6 Network
- 7 WiFi Setup
- 8 Firewall Setup
- 9 Advanced Setup
- 10 QoS PTM Setup
- 11 Utilities
- 12 Telephony
- 13 USB Service
- 14 FCC and IC Statement
- A Troubleshooting
- B Product conformance
- Glossary
............................................................................................................................................................................................................................................................
WiFi SecurityWiFi Setup
7-4
3EQ-10422-AAAA-TCZZA
Edition 01 February 2011
............................................................................................................................................................................................................................................................
WiFi Security
WiFi security enables you to configure the WEP, WPA, or WPA2 security settings.
Select WiFi Security in the WiFi Setup menu to access the WiFi security window; see
Figure 7-2.
Figure 7-2 WiFi Security window
Table 7-2 describes the fields of the WiFi Security settings window.
Table 7-2 Field descriptions
Notes:
1
If you enable WDS, check that all other WDS APs are enabled, configured with the same
channel, SSID, and encryption keys, and that each AP has a different LAN port IP
address.
Field Description
WPS Enable Push Button Control or enable PIN and enter your PIN
number and click Start.