User's Manual

WiFi SettingWiFi Setup
............................................................................................................................................................................................................................................................
3EQ-10422-AAAA-TCZZA
Edition 01 February 2011
7-3
............................................................................................................................................................................................................................................................
Tx Power Enter a value between 1~100 to control the level of transmitting
signal strength.
Radio Mode Click the drop-down menu and select either b/g/n, b/g, g/n, b,
g or n for the wireless mode.
Auto Channel Select Click the drop-down menu and select On to let the wireless
access point automatically select a channel with the least
interference. Select Off to configure manually. Select Now to
set the channel automatically once.
Channel If auto channel select is off, you can manually select a channel
for the wireless access point. The default is 1.
Beacon Period Enter a beacon period in ms to determine the frequency of the
beacon to keep the network synchronized. This is optional.
DTIM Period Enter a value to set the delivery traffic indication message. The
DTIM field is a countdown field informing clients of the next
window for listening to broadcast and multicast messages.
Bandwidth Click the drop-down menu and select either 20/40Mhz or
20Mhz as the transmitting frequency for 802.11n. Select
20/40Mhz can provide double the data transmitting rate of
20Mhz.
Extension Channel 802.11n will create an extension channel to transmit data. Select
a channel from the drop-down menu to use as the extension
channel.
SSID 1 to 4
SSID Enter a SSID name (Maximum of 32 characters). The SSID is
an alphanumeric name shared by all the devices on the wireless
network. It must be unique.
Broadcast SSID Click the drop-down menu and select On to broadcast the SSID
or Off to hide your SSID.
Tx Rate Click the drop-down menu and select Auto to automatically
determine the transmission rate or select a transmission rate
(Max. 54Mbps).
IGMP Enable Enable to use IGMP or disable to turn off IGMP.
WDS
1
Click the drop-down menu and select Enable if you would like
to enter the wireless MAC of other wireless access points or
routers that are in the same WDS.
Other WDS Stations Enter the wireless MAC addresses of other wireless APs or
routers that are in the same WDS.
Apply Changes Click to save your changes.
Field Description