User's Manual
Table Of Contents
- About this document
- Contents
- 1 Product overview
- 2 Hardware installation
- 3 TCP/IP configuration
- 4 Accessing the CellPipe 7130 RG web configuration tool
- 5 Status
- 6 Network
- 7 WiFi Setup
- 8 Firewall Setup
- 9 Advanced Setup
- 10 QoS PTM Setup
- 11 Utilities
- 12 Telephony
- 13 USB Service
- 14 FCC and IC Statement
- A Troubleshooting
- B Product conformance
- Glossary
WAN PTM ConnectionsNetwork
............................................................................................................................................................................................................................................................
3EQ-10422-AAAA-TCZZA
Edition 01 February 2011
6-25
............................................................................................................................................................................................................................................................
QoS Defaults
The QoS Defaults window enables you to configure the default QoS policy for each WAN
connection, see Figure 6-15.
Figure 6-15 QoS Defaults window
Table 6-13 describes the fields of the QoS Defaults window.
Table 6-13 Field descriptions
Field Description
QoS Classification
Queue
Original ToS Tag
(First 3 bits of
DSCP)
Select Original ToS Tag to assign the queue according to the ToS value
of the packet.
Specified Queue Select Specified Queue and enter a queue number (0 to 7) to which the
network traffic will be assigned.
Note: When Specified Queue is chosen, you cannot choose Align
CoS with ToS Value.
To S / D S CP R e m a r ki ng
Keep Original
ToS
Select Keep Original ToS to retain the original ToS value.