User's Manual
Table Of Contents
- About this document
- Contents
- 1 Product overview
- 2 Hardware installation
- 3 TCP/IP configuration
- 4 Accessing the CellPipe 7130 RG web configuration tool
- 5 Status
- 6 Network
- 7 WiFi Setup
- 8 Firewall Setup
- 9 Advanced Setup
- 10 QoS PTM Setup
- 11 Utilities
- 12 Telephony
- 13 USB Service
- 14 FCC and IC Statement
- A Troubleshooting
- B Product conformance
- Glossary
............................................................................................................................................................................................................................................................
WAN PTM ConnectionsNetwork
6-24
3EQ-10422-AAAA-TCZZA
Edition 01 February 2011
............................................................................................................................................................................................................................................................
Untagged Select this option if VLAN ID is not being used.
Always use ID Select this option if VLAN ID is used and enter the
VLAN ID number (between 2 and 4094)
User Name Enter the user name for the PPPoE connection.If
you are not sure, please consult with your ISP for
more information.
Password Enter the password for the PPPoE connection.If you
are not sure, please consult with your ISP for more
information.
Access Concentrator The access concentrator is optional. Please consult
with your ISP for information.
Service Name The service name is optional. Please consult with
your ISP for information.
Mode
Connect on demand: Max idle time Select this option to let the gateway connect to
Internet only when your trying to access it. If there
are no activities in the specified period (Max idle
time), gateway will disconnect the connection.
Always on Select this option to let the gateway always
connected to the Internet.
Manual Select and then click Connect to manually connect
the router to the Internet. Click Disconnect to
disconnect the connection.
Options
Authentication Mode Select the authentication mode from the drop-down
menu. Options include:
• CHAP + PAP
• Only MS-CHAP
• Only CHAP
• Only PAP
This is optional. Your ISP will provide this
information if it is necessary.
MTU (bytes) Select Auto to set the maximum transfer unit to the
default (1492), or enable Manual to manually enter
a value.
Next Click to go to next step.
Back Click to go back to previous page.
Fields Description