User's Manual
Table Of Contents
- About this document
- Contents
- 1 Product overview
- 2 Hardware installation
- 3 TCP/IP configuration
- 4 Accessing the CellPipe 7130 RG web configuration tool
- 5 Status
- 6 Network
- 7 WiFi Setup
- 8 Firewall Setup
- 9 Advanced Setup
- 10 QoS PTM Setup
- 11 Utilities
- 12 Telephony
- 13 USB Service
- 14 FCC and IC Statement
- A Troubleshooting
- B Product conformance
- Glossary
WAN PTM ConnectionsNetwork
............................................................................................................................................................................................................................................................
3EQ-10422-AAAA-TCZZA
Edition 01 February 2011
6-23
............................................................................................................................................................................................................................................................
PPPoE Mode
If you select DHCP as the mode and click Add, the DHCP window with No LAN/WLAN
Binding opens; see Figure 6-14.
Figure 6-14 PPPoE Mode settings window with No LAN/WLAN Binding
Table 6-12 describes the fields of PPPoE Mode setting window with No LAN/WLAN
Binding.
Table 6-12 Field descriptions
MTU (Bytes) Enable Auto to set the maximum transfer unit to the
default (1500), or enable Manual to manually enter
a value.
Next Click to go to next step.
Back Click to go back to preview page.
Field Description
Fields Description
Wan