User's Manual
Table Of Contents
- About this document
- Contents
- 1 Product overview
- 2 Hardware installation
- 3 TCP/IP configuration
- 4 Accessing the CellPipe 7130 RG web configuration tool
- 5 Status
- 6 Network
- 7 WiFi Setup
- 8 Firewall Setup
- 9 Advanced Setup
- 10 QoS PTM Setup
- 11 Utilities
- 12 Telephony
- 13 USB Service
- 14 FCC and IC Statement
- A Troubleshooting
- B Product conformance
- Glossary
............................................................................................................................................................................................................................................................
WAN PTM ConnectionsNetwork
6-22
3EQ-10422-AAAA-TCZZA
Edition 01 February 2011
............................................................................................................................................................................................................................................................
DHCP Mode
If you select DHCP as the mode and click Add, the DHCP window with No LAN/WLAN
Binding opens; see Figure 6-13.
Figure 6-13 DHCP settings window with No LAN/WLAN Binding
Table 6-11 describes the fields of DHCP Mode setting window with No LAN/WLAN
binding.
Table 6-11 Field descriptions
Field Description
WAN
Untagged Select this option if VLAN ID is not being used.
Always Use ID Select this option if VLAN ID is used and enter the
VLAN ID number (between 2 and 4094)
802.1x Select Enable to enable 802.1x, or select Disable to
disable 802.1x. Please consult with your ISP for
more information.
DHCP Options
Host Name
Domain Name
Enter the appropriate Host Name and Domain Name
provided by your ISP. If you are not sure, please
consult with your ISP for more information.
Vender Class ID
Client ID
You may also need to set the Client ID or Vender
Class ID to obtain its lease from the DHCP server.
Please consult with your ISP for more information.