User's Manual
Table Of Contents
- About this document
- Contents
- 1 Product overview
- 2 Hardware installation
- 3 TCP/IP configuration
- 4 Accessing the CellPipe 7130 RG web configuration tool
- 5 Status
- 6 Network
- 7 WiFi Setup
- 8 Firewall Setup
- 9 Advanced Setup
- 10 QoS PTM Setup
- 11 Utilities
- 12 Telephony
- 13 USB Service
- 14 FCC and IC Statement
- A Troubleshooting
- B Product conformance
- Glossary
WAN PTM ConnectionsNetwork
............................................................................................................................................................................................................................................................
3EQ-10422-AAAA-TCZZA
Edition 01 February 2011
6-21
............................................................................................................................................................................................................................................................
Figure 6-12 Static IP settings window with No LAN/WLAN Binding
Table 6-10 describes the fields of Static IP setting window with No LAN/WLAN Binding.
Table 6-10 Field descriptions
Field Description
WA N
Untagged Select this option if VLAN ID is not being used.
Always Use ID Select this option if VLAN ID is used and enter the VLAN ID
number (between 2 and 4094)
IP Address Enter the IP address provided by your ISP.
NetMask Enter the subnet mask provided by your ISP.
Gateway Enter the gateway’s IP address provided by your ISP.
DNS1/2/3 Enter the DNS IP address. They are optional
Options
MTU Select Auto to set the maximum transfer unit to the default
(1500), or select Manual to manually enter a value.
Next Click to go to next step.
Back Click to go back to previous page.