User's Manual
Table Of Contents
- About this document
- Contents
- 1 Product overview
- 2 Hardware installation
- 3 TCP/IP configuration
- 4 Accessing the CellPipe 7130 RG web configuration tool
- 5 Status
- 6 Network
- 7 WiFi Setup
- 8 Firewall Setup
- 9 Advanced Setup
- 10 QoS PTM Setup
- 11 Utilities
- 12 Telephony
- 13 USB Service
- 14 FCC and IC Statement
- A Troubleshooting
- B Product conformance
- Glossary
............................................................................................................................................................................................................................................................
WAN PTM ConnectionsNetwork
6-18
3EQ-10422-AAAA-TCZZA
Edition 01 February 2011
............................................................................................................................................................................................................................................................
Figure 6-10 Bridge Mode settings window with MAC based binding
Table 6-9 describes the fields of Bridge Mode setting window with MAC based binding.
Table 6-9 Field descriptions
Fields Description
LAN Binding
Default The first rule must be the default. After you have a default rule you
can choose the other options. For example, you can select DHCP
Option 60, Ethernet Type, Source MAC, or Destination MAC.
DHCP Option 60 Select the radio button and enter the applicable alphanumeric
identification (wildcard * is also applicable).
Ethernet Type Select the radio button and enter the applicable Ethernet Type code
(4 hex digits).
Source MAC Select the radio button and enter the applicable Source MAC
address in hexadecimal format.
Destination MAC Select the radio button and enter the applicable Destination MAC
address in hexadecimal format.
WAN