User's Manual
Table Of Contents
- About this document
- Contents
- 1 Product overview
- 2 Hardware installation
- 3 TCP/IP configuration
- 4 Accessing the CellPipe 7130 RG web configuration tool
- 5 Status
- 6 Network
- 7 WiFi Setup
- 8 Firewall Setup
- 9 Advanced Setup
- 10 QoS PTM Setup
- 11 Utilities
- 12 Telephony
- 13 USB Service
- 14 FCC and IC Statement
- A Troubleshooting
- B Product conformance
- Glossary
WAN PTM ConnectionsNetwork
............................................................................................................................................................................................................................................................
3EQ-10422-AAAA-TCZZA
Edition 01 February 2011
6-15
............................................................................................................................................................................................................................................................
Figure 6-8 DHCP settings window
Table 6-8 describes the fields of the DHCP Mode setting window.
Table 6-8 Field descriptions
Fields Description
LAN Binding
Default The first rule must be the default. After you have a default rule you
can choose the other options. For example, you can select DHCP
Option 60, Ethernet Type, Source MAC, or Destination MAC.
DHCP Option 60 Select the radio button and enter the applicable alphanumeric
identification (wildcard * is also applicable).
Ethernet Type Select the radio button and enter the applicable Ethernet Type code
(4 hex digits).
Source MAC Select the radio button and enter the applicable Source MAC
address in hexadecimal format.