User's Manual

............................................................................................................................................................................................................................................................
WAN PTM ConnectionsNetwork
6-14
3EQ-10422-AAAA-TCZZA
Edition 01 February 2011
............................................................................................................................................................................................................................................................
MAC based binding
MAC based mode enables you to bind your connection by DHCP Option 60, Ethernet
type, source MAC, or destination MAC.
Before you begin, you must configure a default connection. It should be routed or bridge
mode. Afterwards you can configure MAC based binding (the other binding options are
Port based and No LAN/WLAN) by DHCP Option 60, Ethernet type, source MAC, or
destination MAC.
You can select the MAC Based radio button for each WAN mode and then click Add to
enter the next configuration window.
You can set a maximum of 20 connections in MAC based binding.
Note: If you already have a connection with MAC based binding, you cannot select
Port based binding for any other connections.
The following section shows the creation of a default DHCP connection with MAC based
binding.
DHCP Mode
If you select DHCP as the mode, the DHCP settings window with MAC based binding
opens; see Figure 6-8.
Back Click to back preview page.
Activate WAN Settings Click to activate the connection.
Delete All Click to remove all WAN connections.
Edit Click to modify a specific connection.
Delete Click to remove a specific connection.
Fields Description